Prof. Dr. Muhammad Tufail
1. M.A. Khan, M. Wasif, M. Tufail, S.A. Iqbal, Irshadullah, “Impact of Process Parameters on the Surface Integrity of Fiber Reinforced Composites (FRC) during the Milling Process,” accepted in Journal of Space Technology (HEC “X” Category Journal), May 2020.
2. M. Wasif, S.A. Iqbal, A. Fatima, S. Yaqoob, M. Tufail, “Experimental Investigation for the Effects of Wire EDM Process Parameters over the Tapered Cross-Sectional Workpieces of Titanium Alloys (Ti6Al-4V),”, Mechanical Sciences, vol. 11, issue 1, page 221-232, 2020.
3. M. Wasif, S. A. Iqbal, M. Tufail, H. Karim, "Experimental Analysis and Prediction of Springback in V-bending Process of High-Tensile Strength Steels," Transactions of the Indian Institute of Metals, 73, pages285–300, 2019.
4. Irshad Ullah, M. Tufail, M. Wasif, “Experimental Investigation of Cutting Parameters Effects on the Surface Roughness and Tools Wear during the Drilling of Fiber Reinforced Composite Materials,” Mehran University Research Journal of Engineering and Technology (HEC “X” Category Journal), vol. 38, Issue 3, 2019.
5. M. Wasif, S. A. Iqbal, A. Ahmed, M. Tufail, M. Rababah, "Optimization of simplified grinding wheel geometry for the accurate generation of end-mill cutters using the five-axis CNC grinding process," International Journal of Advanced Manufacturing Technology, vol. 105, page 4325-4344, 2019.
6. M. Tufail, S. H. Lodi, “Implementation Of Quality Standard In Educational Institutions”, International Seminar on Higher Education in the Muslim World: Challenges and Prospects, 24th – 25th March 2008, Kuala Lumpur, Malaysia.
7. M. Tufail, “Processing Investigation and Optimization for Hybrid Thermoplastic Composites”, Journal of University of Science and Technology Beijing April 2007, Volume 14, Issue 2, pp. 185-189
8. M. Tufail, “Processing Investigation and Optimization for Hybrid Thermoplastic Composites”, Journal of University of Science and Technology Beijing April 2007, Volume 14, Issue 2, pp. 185-189.
9. M. Tufail, S. H. Lodi, “ISO 9001 Certification for Higher Educational Institutions in Pakistan”, 1st International Conference on Assessing Quality in Higher Education (1st ICAQHE, 2006), 11th -13th December 2006, Lahore.
10. M. Tufail, “Consolidation Modeling of Fibre Reinforced Thermoplastic Composite Materials”, 9th International Symposium on Advanced Materials, Dr A Q Khan Research Laboratories Kahuta, 19-22 September 2005, Islamabad.
11. M. Tufail, “Consolidation Modeling of Fibre Reinforced Thermoplastic Composite Materials”, 9th International Symposium on Advanced Materials, Dr A Q Khan Research Laboratories Kahuta, 19-22 September 2005, Islamabad.
12. M. Tufail, “Fabrication and Mechanical Testing of Fibre Reinforced Thermoplastic Composite Tubes”, 9th International Symposium on Advanced Materials, Dr A Q Khan Research Laboratories Kahuta, 19-22 September 2005, Islamabad.
13. M. Tufail, A. C. Long, C. D. Rudd, “Mechanical Properties of Braided Commingled Glass/Polypropylene Composites”, 8th International Symposium on Advanced Materials, Dr A Q Khan Research Laboratories Kahuta, 8-11 September 2003, Islamabad.
14. M. Tufail, A. C. Long, C. D. Rudd, “Optimization of Braiding and Consolidation Processes for Commingled Glass / Polypropylene Composites”, 1st International Mechanical Engineering Congress by Institute of Engineers, Pakistan, 26th – 28th May 2001, Karachi.
15. M. Tufail, A. C. Long, C. D. Rudd, “Effects of Consolidation Process on Microstructure and Mechanical Properties of Commingled Glass/Polypropylene Composites”, 7th International Symposium on Advanced Materials, Dr A. Q. Khan Research Laboratories Kahuta, 17-21 September 2001, Islamabad.
16. M. Tufail, P. R. S. Rashidi, “Rapid Prototype Tooling Using Castable Ceramics”, Mehran University Research Journal of Engineering and Technology, Vol. 20, No 1, January 2001, pp. 51-56.
17. M. Tufail, P. R. S. Rashidi, “Consolidation of Commingled Thermoplastic Composite”, Journal of Engineering & Applied Sciences, NWFP University of Engineering & Technology Peshawar, Vol. 20, No. 2 July – Dec 2001, pp. 69-75.
18. A. Al-Hamdan, M. Tufail, A. C. Long, C. D. Rudd, “Skin Thickness Variation During Resin Transfer Moulding of Sandwich Structures”, Advanced Composites Letters, Vol.4 No. 5, 1995, pp.157-161.
19. A. Al-Hamdan, M Tufail, A. C. Long & C. D. Rudd, “Effects of Process Parameters on Core Movement during Liquid Composite Moulding using Incompressible Cores”, 4th International Conference on Automated Composites, 6-7 September 1995, Nottingham, UK.
Prof. Dr. Syed Amir Iqbal
1.M. Wasif, S.A. Iqbal, A. Fatima, S. Yaqoob, M. Tufail, “Experimental Investigation for the Effects of Wire EDM Process Parameters over the Tapered Cross-Sectional Workpieces of Titanium Alloys (Ti6Al-4V),”, Mechanical Sciences, vol. 11, issue 1, page 221-232, 2020.
2. M.A. Khan, M. Wasif, M. Tufail, S.A. Iqbal, Irshadullah, “Impact of Process Parameters on the Surface Integrity of Fiber Reinforced Composites (FRC) during the Milling Process,” accepted in Journal of Space Technology (HEC “X” Category Journal), May 2020.
3. Rababah, M. Wasif, M. & S. A. Iqbal, "Parametric relationship between hypoid gear teeth and accurate face-milling cutter", Advances in Manufacturing, Available online (2020). https://doi.org/10.1007/s40436-019-00286-x.
4. A.Fatima , S. A. Iqbal, “Identifying direct electrical energy demand in wire-cut EDM” Mehran University research journal, 2020. https://doi.org/10.22581/muet1982.2001.16
5. M. Wasif, S. A. Iqbal, M. Tufail, H. Karim, "Experimental Analysis and Prediction of Springback in V-bending Process of High-Tensile Strength Steels," Transactions of the Indian Institute of Metals, 73, pages285–300, 2019.
6. M. Wasif, S. A. Iqbal, A. Ahmed, M. Tufail, M. Rababah, "Optimization of simplified grinding wheel geometry for the accurate generation of end-mill cutters using the five-axis CNC grinding process," International Journal of Advanced Manufacturing Technology, vol. 105, page 4325-4344, 2019.
7. M. Rababah, M. Wasif, A. Ahmed, S. A. Iqbal, “Accurate Machine-Settings for the Face-Milling of Hypoid Gears,” International Review of Mechanical Engineering (IREME), vol. 11, No. 12, page 1-12, 2018. (DOI 10.15866/ireme.v11i12.14194)
8. S. A. Iqbal, P. T. Mativenga, M. A. Sheikh, “An evaluation of flow stress material models of AISI1045 for high speed machining”, 331-336, in proc. 4th International Conference on Manufacturing Research 2006, Liverpool, UK.
9. S. A. Iqbal, P. T. Mativenga, M. A. Sheikh, “Characterization of the Machining of AISI 1045 steel over a wide range of cutting speeds-Part 1: Investigation of contact phenomena”, 909-916, 221(5), Proceedings of IMechE Part B: Journal of Engineering Manufacture. 2007
10. S. A. Iqbal, P. T. Mativenga, M. A. Sheikh, “Characterization of the Machining of AISI 1045 steel over a wide range of cutting speeds-Part 2: Evaluation of flow stress models and interface friction distribution schemes”, 917-926, 221(5), Proceedings of IMechE Part B: Journal of Engineering Manufacture, 2007
11. S. A. Iqbal, P. T. Mativenga, M. A. Sheikh, “Contact length prediction: mathematical models and effect of friction schemes on FEM simulation for conventional to HSM of AISI 1045 steel”, 3(1/2), 18-33, Int. J. Machining and Machinability of Materials, 2008.
12. S. A. Iqbal, P. T. Mativenga, M. A. Sheikh, “A comparative study of tool chip contact length of two engineering alloys for a wide range of cutting speeds”, Intl. J. Advanced Manufacturing Technology, 2008.
13. S. A. Iqbal, P. T. Mativenga, M. A. Sheikh, “A sensitivity study of the effects of interface heat transfer coefficient on FE modelling of machining process for a wide range of cutting speeds”, 6th International Conference on Manufacturing Research – ICMR-2008, 9-11 September 2008, Brunel University, Middlesex, UK.
14. S. A. Iqbal, P. T. Mativenga, M. A. Sheikh, “An investigative study of interface heat transfer coefficient for the FE modelling of High Speed Machining process”, 1405-1416, 222, Proc. IMechE Part B: Journal of Engineering Manufacture, 2008
15. Salman, S. A. Iqbal, and R. Khalid, “Development of an Aggregate Planning and Scheduling Model for better management of Supply Chain of a Discrete Manufacturing Industry using Linear Programmeming Techniques”, Paper in-process. (under Independent Study Project (ISP)).
16. Khalid, Mumtaz, A. Zulqarnain and S. A. Iqbal “Quality Cost Procedure: Findings of a Wood Products’ Manufacturer”. Journal of Total Quality Management & Business Excellence, Vol. 28, No. 1, pp 2-20.
17. A. Zulqarnain, S. A. Iqbal, and R. Khalid, “Implementing Six Sigma Methodology in a developing country.” International Journal of Process Management and Benchmarking, Vol. 3, No. 3, 2013.
18. M. Wasif, S. M. Hasan, S. A. Iqbal, “Determination of Cutter-Head Geometry for the Face-Milling of Hypoid Gears”, submitted in International Journal of Advanced Manufacturing Technology, 14-10-2015.
19. S. M. Hasan, M. Wasif, S. A. Iqbal, “A Decision Making Collaborative Framework in Extended Supply Chain”, submitted in Journal of Engineering & Applied Sciences (UET Peshawar), 27-07-2014. (This journal is listed in W- category of HEC’s approved journals)
20. S. M. Hasan, S. Shah, M. Wasif & S. A. Iqbal, “Supply Chain Performance Improvement within Collaborative Product Development Environment”, submitted in International Journal of Supply Chain Management, 31-12-2014.
21.M. Wasif, M. Rababah, S. M. Hasan, S. A. Iqbal, “Determination of Accurate Machine-Settings for the Face-Milling of Hypoid Gear”, 5th International Mechanical Engineering Congress, 9-10th May, 2015, Karachi, Pakistan.
22. S. M. Hasan, J. Gao, M. Wasif and S. A. Iqbal, “An Integrated Decision Making Framework for Automotive Product Development with the Supply Chain”, 8th International Digital Enterprise Technology (DET) Conference, Stuttgart – Germany, 2014.
23. S. M. Hasan, M. Wasif and S.A. Iqbal, "A Collaborative framework for Product Development in Extended Enterprise", International Conference on Emerging Trends in Engineering and Technology (ICETET'2013), Dec. 7-8, Patong Beach, Phuket (Thailand), 2013.
24. A. Ahmed, L. Wang, S.A. Iqbal, “An Efficient Method of Collision Detetection For 5-axis CNC Milling”, 5th International Mechanical Engineering Congress, 9-10th May, 2015, Karachi, Pakistan.
25. Khalid, Mumtaz, A. Zulqarnain and S.A. Iqbal, “Quality Cost Procedure: Findings of a Wood Products’ Manufacturer”, Journal of Total Quality Management & Business Excellence, Vol. 28, No. 1, pp 2-20, 2015.
Dr. Maqsood Ahmed Khan
1. S. A. Khan, M. Fahad, M. A. Khan, “Green Additive Manufacturing”, 6th International Mechanical Engineering Congress on Green Systems and Innovation, IEP, Karachi, Pakistan; 07/2016
2. S. A. Khan, B. A. Siddiqui, M. Fahad, M. A. Khan, “Evaluation of the Effect of Infill Pattern on Mechanical Strength of Additively Manufactured Specimen”, Materials Science Forum 03/2017; 887:128-132., DOI:10.4028/www.scientific.net/MSF.887.128
3. M. A. Khan, Z. C. Chen, “Arc-length parameterized NURBS path interpolation for high speed and precision machining”, Proceeding of the 19th International Symposium on Air Breathing Engines, September 13-19, 2009, Montreal, Quebec, Canada.
4. M. A. Khan, Z. C. Chen, “An Integrated Approach to Generating Accurate Cutter Location Path with Approximate Arc Length Parameter”, Proceedings of the Canadian Society for Mechanical Engineering Forum 2010, June 10-11, 2010, Victoria, British Columbia, Canada.
5. M. A. Khan, Z. C. Chen, “A new Approach to Generating Accurate NURBS Cutter Location paths with Arc Length Parameter”, Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, August 15-18, 2010, Montreal, Quebec, Canada.
6. M. A. Khan, Z. C. Chen, “An Effective Approach to Approximating 2-D Free-Form Curve Offsets for B-Spline NC Tool Paths with Offset Error Globally Bounded”, Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, August 15-18, 2010, Montreal, Quebec, Canada.
7. M. A. Khan, Z. C. Chen, “Piecewise NURBS Tool Path with the Arc Length Parameter and their Application on High Feed, Accuracy CNC Milling of 2-D Curved Profiles”, Journal of Manufacturing Science and Engineering, Transactions of ASME, 2010.
8. M. A. Khan, Z. C. Chen, “Generating Planar Offset Curves with Globally Bounded Offset Error for B-Spline NC Tool Paths”, International Journal of Production Research, 2010.
9. M. A. Khan, Z. C. Chen, “A New Approach to Generating Arc Length Parameterized NURBS Tool Paths for Efficient 3-Axis Machining of Smooth, Accurate Sculptured Surfaces”, Submitted to Computer-Aided Design, 2010.
10. M. A. Khan, Z. C. Chen, “An Effective Approach to Approximating 2-D Free-Form Curve Offsets for B-Spline NC Tool Paths with Offset Error Globally Bounded”, Proceedings of the Canadian Society for Mechanical Engineering Forum 2010, June 7-9, 2010, Victoria, British Columbia, Canada.
11. Z. C. Chen, M. A. Khan, “Piecewise B-Spline Tool Paths With the Arc-Length Parameter and Their Application on High Feed, Accurate CNC Milling of Free-Form Profiles”, Trans. ASME J. Manuf. Sci. Eng., 2012, Vol. 134 / 031007-13.
12. M. A. Khan, Z. C. Chen, “CL-Path in B-Spline Form with Global Error Control for 3-Axis Sculptured Surface Machining”, Proceedings of the 2nd International Conference on Mechanical, Production and Automobile Engineering (ICMPAE'2012), April 28-29, 2012, Singapore.
13. S. A. Khan, B. A. Siddiqui, M. Fahad, M. A. Khan, “Evaluation of the Effect of Infill Pattern on Mechanical Strength of Additively Manufactured Specimen”, Materials Science Forum.
Dr. Muhammad Fahad
1. S. A. Khan, M. Fahad, M. A. Khan, “Green Additive Manufacturing”, 6th International Mechanical Engineering Congress on Green Systems and Innovation, IEP, Karachi, Pakistan; 07/2016
2. S. A. Khan, B. A. Siddiqui, M. Fahad, M. A. Khan, “Evaluation of the Effect of Infill Pattern on Mechanical Strength of Additively Manufactured Specimen”, Materials Science Forum 03/2017; 887:128-132., DOI:10.4028/www.scientific.net/MSF.887.128
3. M. Fahad, M. Gilbert, P. Dickens, “Microscopy and FTIR investigations of the thermal gelation of methylcellulose in glycols”, Polymer Science Series A 01/2017; 59(1):88-97., DOI:10.1134/S0965545X17010047
4. M. Fahad, “Additive Manufacturing”, Materials Processing For Engineering Manufacture, Edited by Zainul Huda, 10/2016: chapter 17: pages 357-378; Trans Tech Publications., ISBN: ISBN: 978-3-03835-721-6
5. M. Fahad, Z. Huda, “Computer Integrated Manufacturing”, Materials Processing For Engineering Manufacture, Edited by Zainul Huda, 10/2016: chapter 16: pages 327-353; Trans Tech Publications., ISBN: ISBN: 978-3-03835-721-6
6. S. A. A. Naqvi, M. Fahad, M. Atir, M. Zubair, M.M. Shehzad, W. Xu: Productivity improvement of a manufacturing facility using systematic layout planning. Cogent Engineering 06/2016; 3(1)., DOI:10.1080/23311916.2016.1207296
7. M. Fahad, N.Hopkinson, “Evaluation and comparison of geometrical accuracy of parts produced by sintering-based additive manufacturing processes”, International Journal of Advanced Manufacturing Technology 06/2016;, DOI:10.1007/s00170-016-9036-z
8. M. A. Siddiqui, S. M. Qureshi, M. Fahad, “Building on Technical Competencies”, International Conference on Applied Mechanics and Industrial Systems, Oman, 2016
9. Muhammad Midhat Ali, M. Fahad, S. M. Qureshi, “Technical Competency Framework: Development and Implementation”. 6th International Mechanical Engineering Congress on Green Systems and Innovation, IEP, Karachi, Pakistan; 07/2016
10. M. Fahad, S. T. Bukhari, JorritLeijting, “Assessment and Comparison of Sustainability of Household Products Manufactured in Pakistan using LCA”. 6th International Mechanical Engineering Congress on Green Systems and Innovation, IEP, Karachi, Pakistan; 07/2016
11. S. A. A. Naqvi, M. Fahad, M. Atir, M. Zubair, M. M. Shehzad, “Design and Evaluation of Layout for an Energy Efficient Faclity”, 6th International Mechanical Engineering Congress on Green Systems and Innovation, IEP, Karachi, Pakistan; 07/2016
12. S. A. Khan, M. Fahad, M. A. Khan, “Green Additive Manufacturing”,6th International Mechanical Engineering Congress on Green Systems and Innovation, IEP, Karachi, Pakistan; 07/2016
13. S. Perween, M. Fahad, M. A. Khan, “Trends and Future Perspectives in Additive Manufacturing”, Proceedings of First International Conference on Advanced Materials and Process Engineering, Karachi, Pakistan (December 2015)
14. S. A. Khan, M. Fahad, M. A. Khan, “Evaluation of the Effect of Infill Pattern on Mechanical Strength of Additively Manufactured Specimen”, Proceedings of First International Conference on Advanced Materials and Process Engineering, Karachi, Pakistan (December 2015)
15. J. A. Ali, S. Z. A. Naqvi, R. Afzal, T. A. Memon, M. Fahad, M. A. Khan, “Design of a three dimensional printing machine”, First International Symposium on Automotive and Manufacturing Engineering, Islamabad, Pakistan (November 2015)
16. S. A Khan, B.A Siddiqui, M. Fahad, “Evaluation of Additive Manufacturing Techniques for Fabrication of Propellers for SUAVs”, Proceedings of Fourth International Conference on Aerospace Science & Engineering, Islamabad, Pakistan (September 2015)
17. J.Younus, M. Fahad, M. A. Khan, “Evaluation and benchmarking of maintenance organization and planning/scheduling at automotive industries in Pakistan” Procedia CIRP (Accepted for Publication, 2015)
18. J. Younus, M. Fahad, M. A. Khan, “Evaluation of maintenance management practices in automotive industries of Pakistan”, 5th International Mechanical Engineering Congress, Karachi Pakistan (May 2015)
19. B. Ali, S. Jaweed, M. Fahad, “Implementation of Waste Assessment Matrix and Line Balancing For Productivity Improvement in a High Variety/High Volume Manufacturing Plant”, 5th International Mechanical Engineering Congress, Karachi Pakistan (May 2015)
20. M. Fahad, M. Gilbert, P. Dickens, “Thermal Gelation of Pluronic F-127 in Ethylene Glycol as a non-aqueous solvent” Plastics, Rubber and Composites: Macromolecular Engineering, Volume 41, Number 3, April 2012 , pp. 148-156(9).
21. M. Fahad, P. Dickens, M. Gilbert, “Novel polymeric support materials for jetting based additive manufacturing processes” Rapid Prototyping Journal, Volume 19, Issue 4, 2013, pp. 230-239.
22.M. Fahad, M. A. Khan, M. Gilbert, “Evaluation of thermal gelation of F-127 in a non-aqueous solvent and its suitability as a support materials for Additive Manufacturing” 4th International Conference on Key Engineering Materials, 22 – 23 March 2014, Bali (Indonesia).
23. M. Fahad, N.Hopkinson, “Evaluation of parts produced by a novel Additive Manufacturing (AM) process” 3rd International Conference on Mechanical and Manufacturing Engineering, 20-21 November 2012, Johor (Malaysia).
24. M. Fahad, M. Gilbert, P. Dickens, “Gel formation of Methylcellulose in Binary Solvent (water and glycol) and its evaluation as support material for jetting based Additive Manufacturing (AM) processes” International conference on Materials Processing Technologies, 28-29 June 2012, Hawaii (USA).
25. M. Fahad, N.Hopkinson, “A new benchmarking part for evaluating the accuracy and repeatability of Additive Manufacturing (AM) processes” 2nd International Conference on Mechanical, Production and Automobile Engineering (ICMPAE’2012), 28-29 April 2012, Singapore.
26. M. Fahad, M. Gilbert, P. Dickens, “Novel jettable polymeric support material composition for additive manufacturing (AM) processes” International Conference on Mechanical, Production and Automobile Engineering (ICMPAE’2012), 07-08 January 2012, Dubai.
27. M. Fahad, M. Gilbert, P.Dickens, “Thermally formed gels of methylcellulose and their suitability as support materials for jetting based additive manufacturing processes” 12th Conference on Rapid Design, Prototyping and Manufacturing, 17th June 2011, Lancaster (United Kingdom).
28. M. Fahad, M. Gilbert, P. Dickens, “Novel polymeric gels and their use for jetting based additive manufacturing processes” International conference on Materials Processing Technologies, 2-3 June 2011, Phuket (Thailand).
29. M. Fahad, M. Gilbert, P. Dickens, “Research into a novel support material for jetting based RM process” 21st Solid Freeform Symposium, 9-11 August 2010, Texas (USA).
Mr. M. Shoaib
1. M. Shoaib “Three dimensional finite element analysis of chip formation in metal cutting”, 2nd International conference on vibro-impact system, China, 6th to 9th Jan,2010.
2.M. Shoaib “Modeling of three dimensional tool wear based on finite element method”, 20th “International workshop on computational mechanics of material” at loughborough University, UK, 8th to 10th Sep, 2010.
Mr. Ali Zulqarnain
1. Zulqarnain, A., Wasif, M. and Iqbal, S.A., 2022. Developing a quality 4.0 implementation framework and evaluating the maturity levels of industries in developing countries. Sustainability, 14(18), p.11298.
https://doi.org/10.3390/
2. Wasif, M., Khan, Y.A., Zulqarnain, A. and Iqbal, S.A., 2022. Analysis and optimization of wire Electro-Discharge Machining process parameters for the efficient cutting of Aluminum 5454 alloy. Alexandria Engineering Journal, 61(8), pp.6191-6203.
https://doi.org/10.1016/j.aej.
https://www.prdb.pk/article/
4. Malik, T.M., Khalid, R., Zulqarnain, A. and Iqbal, S.A., 2016. Cost of quality: findings of a wood products' manufacturer. The TQM Journal.
https://doi.org/10.1108/TQM-
5. Waseem, A., Zulqarnain, A., Khalid, R. and Saleem, S., 2015. Gauge repeatability and reproducibility: an assessment of method and medium for a laboratory. International Journal of Six Sigma and Competitive Advantage, 9(2-4), pp.126-149. https://doi.org/10.1504/
6. Zulqarnain, A., Iqbal, S.A. and Khalid, R., 2013. Implementing Six Sigma methodology in a developing country. International Journal of Process Management and Benchmarking, 3(3), pp.314-333.
https://doi.org/10.1504/IJPMB.
Ms. Sadia Majeed
1. S. Majeed , Z. Huda, “Economics of Manufacturing” Chapter of Book “ Materials Processing For Engineering Manufacture “Chapter 18 Trans Tech Publication 381-406 , 978-3-03835-721-6
2. S. M. Qureshi, S. Majeed, R. Khalid, “Where Do We Stand in Cost of Quality Awareness? Pakistan's Case”, International Journal of Quality Engineering and Technology, 4(4), 273-289, 2014.
3. S. Majeed, Q. M. Ahmed, & M. S. Butt, “Total Factor Productivity in Pakistan revisited: A dual approach of productivity measurement”, Journal of Social Sciences & Interdisciplinary Research, 3(1), 21-36, 2014.
Dr. Muhammad Wasif
1. M.A. Khan, M. Wasif, M. Tufail, S.A. Iqbal, Irshadullah, “Impact of Process Parameters on the Surface Integrity of Fiber Reinforced Composites (FRC) during the Milling Process,” accepted in Journal of Space Technology (HEC “X” Category Journal), May 2020.
2. M. Wasif, S.A. Iqbal, A. Fatima, S. Yaqoob, M. Tufail, “Experimental Investigation for the Effects of Wire EDM Process Parameters over the Tapered Cross-Sectional Workpieces of Titanium Alloys (Ti6Al-4V),”, Mechanical Sciences, vol. 11, issue 1, page 221-232, 2020.
3.S. H. Raza, R. Khalid, M. Wasif, “Impact of Critical Risks on the Major Constraints of Small Engineering Projects,” accepted in Mehran University Research Journal of Engineering and Technology (HEC “X” Category Journal), Dec. 2019.
4. Rababah, M. Wasif, M. & Iqbal, S.A. "Parametric relationship between hypoid gear teeth and accurate face-milling cutter", Advances in Manufacturing, Available online (2020). https://doi.org/10.1007/s40436-019-00286-x.
5. M. Wasif, S. A. Iqbal, M. Tufail, H. Karim, "Experimental Analysis and Prediction of Springback in V-bending Process of High-Tensile Strength Steels," Transactions of the Indian Institute of Metals, 73, pages285–300, 2019.
6. Irshad Ullah, M. Tufail, M. Wasif, “Experimental Investigation of Cutting Parameters Effects on the Surface Roughness and Tools Wear during the Drilling of Fiber Reinforced Composite Materials,” Mehran University Research Journal of Engineering and Technology (HEC “X” Category Journal), vol. 38, Issue 3, 2019.
7. M. Wasif, S. A. Iqbal, A. Ahmed, M. Tufail, M. Rababah, "Optimization of simplified grinding wheel geometry for the accurate generation of end-mill cutters using the five-axis CNC grinding process," International Journal of Advanced Manufacturing Technology, vol. 105, page 4325-4344, 2019.
8. M. Rababah, M. Wasif, M. Omari, S. Mutawe, “A Novel Approach to Profile-Milling for End-Mill Flutes in 4-Axis CNC Turn-Milling Machines, Part II: Simulation and Verification,” International Review of Mechanical Engineering (IREME), vol. 13, Issue 3, online, 2019.
9. M. Rababah, M. Wasif, M. Omari, S. Mutawe, “A Novel Approach to Profile-Milling for End-Mill Flutes in 4-Axis CNC Turn-Milling Machines, Part I: Mathematical Modeling,” International Review of Mechanical Engineering (IREME), vol. 13, Issue 2, page 133-141, 2019. (DOI 10.15866/ireme.v13i2.16376).
10. M. Rababah, M. Wasif, A. Ahmed, S. A. Iqbal, “Accurate Machine-Settings for the Face-Milling of Hypoid Gears,” International Review of Mechanical Engineering (IREME), vol. 11, No. 12, page 1-12, 2018. (DOI 10.15866/ireme.v11i12.14194)
11. Z.C. Chen, M. Wasif, “A Generic and Theoretical Approach to Programming and Post-Processing for Hypoid Gear Machining on Multi-Axis CNC Face-Milling Machines,” International Journal of Advanced Manufacturing Technology, vol. 81, Issue 1, page 135-148, 2015. (DOI 10.1007/s00170-015-7171-6).
12. M. Wasif, Z. C. Chen, “An accurate approach to determine the cutting system for the face milling of hypoid gears,” International Journal of Advanced Manufacturing Technology, vol. 84, Issue 9-12, page 1873-1888, 2015. (DOI 10.1007/s00170-015-7823-6).
13. M. Wasif, Z. C. Chen, S. M. Hasan, “Determination of Cutter-Head Geometry for the Face-Milling of Hypoid Gears,” International Journal of Advanced Manufacturing Technology, vol. 86, Issue 9, page 3081-3090, 2016. (DOI 10.1007/s00170-016-8430-x).
14. Asif A. Shaikh, M. Wasif, Riaz Uddin, "Excellence in Quality Education through Implementation of Strategic Framework and SMART KPIS in Higher Education Institute," NOLEGEIN Journal of Leadership and Strategic Management, vol. 3, Issue 2, 2019. ISSN: 2581-2888.
15. Asif A. Shaikh, M. Wasif, Riaz Uddin, "Excellence in Quality Education through Implementation of Strategic Framework and SMART KPIS in Higher Education Institute," Proceedings of 174th ISERD International Conference, New York, USA, 16th -17th October 2019.
16. Asif A. Shaikh, M. Wasif, M. A. Bhutto, Riaz Uddin, “Risk based approach and Smart KPIs for the Quality Assurance in Higher Education Institutions,” in 2nd International Conference on Quality Assurance at Higher Education – PNQAHE, April 23-25, 2019, University of Education, Lahore.
17. M. A. Bhutto, Asif A. Shaikh, M. Wasif, Riaz Uddin, “Implementing Quality Assurance in Universities/HEIs by Ensuring and Promoting Stakeholders’ Trust,” in INQAAHE 15th Biennial Conference 2019, March 25-28, 2019, Colombo - Sri Lanka.
18. M. Aslam Bhutto, Asif. A. Shaikh, M. Wasif, “Impact of Quality Enhancement Practices” in 1st International Conference on Quality Assurance at Higher Education, December 18-19, 2017, Khyber Medical University, Hayatabad Peshawar.
19. M. Aslam Bhutto, Asif. A. Shaikh, M. Wasif, “Improving Quality of the Academic Programs in Universities/HEIs through Self-Assessment Mechanism” in Conference on Quality Assurance QCON '17, March 2017, LUMHS, Jamshoro.
20. M. Wasif, M. Rababah, S. M. Hasan, S. A. Iqbal, “Determination of Accurate Machine-Settings for the Face-Milling of Hypoid Gear” in 5th International Mechanical Engineering Congress, 9-10th May, 2015, Karachi, Pakistan.
21. S. M. Hasan, J. Gao, M. Wasif and S. A. Iqbal, “An Integrated Decision-Making Framework for Automotive Product Development with the Supply Chain” in 8th International Digital Enterprise Technology (DET) Conference, Stuttgart – Germany, 2014.
22. S. M. Hasan, M. Wasif and S.A. Iqbal, "A Collaborative framework for Product Development in Extended Enterprise" in International Conference on Emerging Trends in Engineering and Technology (ICETET'2013), Dec. 7-8, Patong Beach, Phuket (Thailand), 2013.
23. M. Wasif, Z. C. Chen, S. M. Hasan, “An Accurate Cutter-head Geometry for the CNC Face-milling of Hypoid Gears” in International Conference on Emerging Trends in Engineering and Technology (ICETET'2013), Dec. 7-8, Patong Beach, Phuket (Thailand), 2013.
24. M. Wasif, Z. C. Chen, “Cutter radius and blade angle selection model for the high speed face milling of hypoid gear” in International conference on virtual machining process technology (VMPT 2012), May 28 to June 1, Montreal, 2012.
25. M. Wasif, Z. C. Chen, “Mathematical model of the pressure and spiral angles on hypoid gear teeth machined with industrial blade” in International conference on virtual machining process technology (VMPT 2012), May 28 to June 1, Montreal, 2012.
Dr. Syed Mehmood Hasan
1. A. Rasheed, M. Khalili, S. M. Hasan & U. Hasan, “ Increasing Overall Equipment Effectiveness (OEE) through Changeover Time reduction: A Pharmaceutical Case Carried through DMAIC Cycle” in International Journal of Industrial Engineering: Theory, Application and Practice (IJIETAP), 05th May 2020
2. A. Zaid, M. Anwar, S. M. Hasan & S. A. Khan, “Tracing Mechanism through Quick Response Codes to Control Returns in a Fast Moving Consumer Goods Company”, in International Journal of Retail Distribution Management (IJRDM), 02nd June 2020
3. T. Mumtaz, S. M. Hasan, S. A. Khan & S. Shah, “The Impact of Supply Chain Management Practices on Firm Performance: An Empirical Study in an Emerging Economy”, submitted in International Journal of Industrial Engineering: Theory, Application and Practice (IJIETAP), 25th June 2020.
4. T. Mumtaz, S. M. Hasan, A. Pirayesh & A. Jaegler, “The Influence of supply chain risk and supply chain internal integration on organizational performance”, International Journal of Production Economics (IJPE), 25th June 2020.
5. S. A. Khan, S. Fatima, S. M. Hasan and S. kusi-Sarpong, “An Integrated Decision Support System to Reduce Time to Market in Apparel Supply Chain”, in Operations Management Research (OMR) on 04th June 2020
6. S. Khan, A. Hakim, S. M. Hasan and M. Anwar, “ Identification of Lean Wastes in Packaging to Deliver Efficient Waste controlling techniques for a Pharmaceutical Industry” in International Journal of Manufacturing Technology and Management (IJMTM), 06th June 2020.
7.M. Kausar, M. Anwar, & S. M. Hasan, “Implementation of the Balanced Scorecard (BSC) in a refinery to achieve strategic targets”, in International Journal of Industrial Engineering: Theory, Application and Practice (IJIETAP), 07th June 2020
8. H. Kumar, S. M. Hasan, M. Anwar and S. Shah, “Analysing the quantitative aspect of lean implementation using discrete event simulation” in Engineering Management Journal, 07th June 2020.
9. R. Zubair, S. M. Hasan, M. Wasif and S. A. Khan, “ A Conceptual Framework to integrate New Product Development and Supply Chain Management with Organizational Business Flow in an Extended Environment”, International Journal of Business Performance and Supply Chain Modelling (IJBPSCM), 01st July 2020
10. M. Zaidi, S. M. Hasan, F. Altaf and S. Shah, “Framework Designing and Analysis of Risks Associated in Supply Chain within an Organization and Measures to Mitigate it” in European Journal of Industrial Engineering (EJIE) on 10th July 2020.
11. M. Mehmood, A. Sehar, S. M Hasan and S. Shah, “Application of Lean Concept to streamline process flow in denim sector: A Case Analysis” in Engineering Management Journal, 14th July 2020.
12. S. T. Rehman, S. A. Khan, S. Kusi-Sarpong, and S. M. Hasan, "Supply chain performance measurement and improvement system: A MCDA-DMAIC methodology", Journal of Modelling in Management, Vol. 13 No. 3, pp. 522-549, 2018
13. S. M. Hasan, S. A. Khan and S. Shah, “Supply chain performance improvement within collaborative product development environment” in International Journal of Business Performance and Supply Chain Modelling, Vol. 9, No. 4, pp. 261-279,2017.
14. M. J. R. Burney, A. Rauf, S. M. Hasan and S. A. Khan “Linking planning strategies with supply chain in an extended environment: a theoretical framework” in International Journal of Modelling in Operations Management, Vol. 6, No. 4, 2017.
15. S. Shah, G. Elmira and S. M. Hasan, “Environmental Management Systems and Sustainability in SMEs”, Proceedings of the 20th International Conference on Circuits, Systems, Communications and Computers (CSCC 2016), MATEC Web of Conferences Volume 76 (2016), Corfu Island, Greece, 14-17 July 2016, WSEAS, pp. 114-120. ISBN 978-1-5108-3166-7.
16. S. Shah and S. M. Hasan, “Procurement Practices in Project Based Manufacturing Environments”, Proceedings of the 20th International Conference on Circuits, Systems, Communications and Computers (CSCC 2016), MATEC Web of Conferences Volume 76 (2016), Corfu Island, Greece, 14-17 July 2016, WSEAS, pp. 121-127. ISBN 978-1-5108-3166-7.
17. M. Wasif, Z. C. Chen and S.M. Hasan, “Determination of cutter-head geometry for the face-milling of hypoid gears”. International Journal of Advancement in Manufacturing Technology, 86, pp. 3081–3090, 2016.
18. P. Ishtiaq, S. M. Hasan and S. A. Khan, “Performance Analysis of Inventory Models, Distribution and Transportation Networks in Forward Supply Chain; A Theoretical Approach” in International Journal of Modelling in Operations Management, Vol.6 No.1/2, pp.59 – 87,2016.
19. M. Wasif, S. M. Hasan, S. A. Iqbal, “Determination of Cutter-Head Geometry for the Face-Milling of Hypoid Gears”, submitted in International Journal of Advanced Manufacturing Technology, 14-10-2015.
20. M. Wasif, M. Rababah, S. M. Hasan, S. A. Iqbal, “Determination of accurate machine-settings for the face-milling of hypoid gear”, 5th International Mechanical Engineering Congress, 9th and 10th May, 2015.
21. S. Shah and S. M. Hasan, “Influence of IT on Micro Enterprises to pursue Strategic Growth”, Proceedings of the 19th International Conference on Computers (part of CSCC '15), Zakynthos Island, Greece July 16‐20, 2015, page 488-496, ISBN: 978‐1‐61804‐320‐7.
22. S. Shah and S. M. Hasan, “Use of Business Competitions to Enhance Student Employability in Higher Education”, Proceedings of the 19th International Conference on Computers (part of CSCC '15), Zakynthos Island, Greece July 16‐20, 2015, ISBN: 978‐1‐61804‐320‐7.
23. S. Shah, A. B., Sara and S. M. Hasan, “Use of business competitions to enhance student employability in Higher Education. In: Recent Advances in Educational Technologies”, Proceedings of the 2015 International Conference on Education and Modern Educational Technologies (EMET 2015). Educational Technologies Series, 18 (18). WSEAS, Greece, pp. 140-147. ISBN 978-1-61804-322-1
24. S. M. Hasan, J. Gao, S. A. Iqbal, “A collaborative framework for decision making in automotive product development and supply chain”, 8th International Conference on Digital Enterprise Technology, March 25 – 28, 2014, Stuttgart, Germany.
25. S. M. Hasan, M. Wasif, S. A. Iqbal, “A Decision Making Collaborative Framework in Extended Supply Chain”, submitted in Journal of Engineering & Applied Sciences (UET Peshawar), 27-07-2014.
26. S. M. Hasan, S. Shah, J. Gao, “A collaboration framework to support decision making in new product development with the supply chain”, International Conference on Manufacturing research, 19-20 September 2013, Cranfield University, UK.
27. S. M. Hasan, S. Shah, “An overview of change management within manufacturing environment”, International Conference on Manufacturing Science and Technology, 3-4 August 2013, Dubai, U.A.E.
28. S. M. Hasan, O.Owodunni, J. Gao, “A framework that integrate information/knowledge flow within product development activities in the extended enterprise”, 11th School Research Conference – Engineering, University of Greenwich, Medway Campus, Kent – UK, 2013.
29. S. M. Hasan, S. Shah, “Use of process modelling in product development integration within manufacturing environment”, International Conference on Manufacturing Science and Technology, 3-4 August 2013, Dubai, U.A.E.
30. S. M. Hasan, S. Shah, J. Gao, “Performance improvement within collaborative product development environment”, International Journal of Productivity and Performance Management - Manuscript ID IJPPM-03-2013-0060.
31. S. M. Hasan, M. Wasif , S. A. Iqbal, "A collaborative framework for product development in extended enterprise", International Conference on Emerging Trends in Engineering and Technology (ICETET'2013), Dec. 7-8, 2013 Patong Beach, Phuket (Thailand).
32. M. Wasif, Z. C. Chen, S. M. Hasan, S. A. Iqbal, “A Generic and Theoretical Approach to CNC Programmeming and Post-Processing for Multi-Axis Face-Milling of Hypoid Gears”, International Conference on Emerging Trends in Engineering and Technology (ICETET'2013), Dec. 7-8, 2013 Patong Beach, Phuket (Thailand).
33. S. M. Hasan, S. Shah, J. Gao, “A collaboration framework for product development in extended enterprise”, Proceedings of 10th international conference on manufacturing research - Advances in Manufacturing Technology, XXVI, Vol. 2, ISBN 9781905866601, 11-13 September 2012.
34. S. M. Hasan, O.Owodunni, J. Gao, “A framework that integrate information/knowledge flow within product Development activities in the extended enterprise”, 10th School Research Conference – Engineering, University of Greenwich, Medway Campus, Kent – UK 2012.
Dr. Aqeel Ahmed
1. A. Ahmed, Z. C. Chen, L. Wang, “Safe and short tool length determination for 5-axis machining of sculptured surfaces”, Ist international conference on virtual machining process technology. CIRP sponsored conference in May, 2012.
2. L. Wang, A. Ahmed, Z. C. Chen, “A parametric CAD model of end mill based on grinding processes” 1st international conference on virtual machining process technology. CIRP sponsored conference in May, 2012.
3. A. Ahmed, Z. C. Chen, “A Precise Approach for the Determination of the Setup Parameters to Utilize Maximum Work Space of 5-Axis Machine Tools”, International Journal of Advanced Manufacturing Technology, online, Springer, 2015. (20-11-2015)
4. A. Ahmed, L. Wang, S. A. Iqbal, “An Efficient Method of Collision Detetection For 5-axis CNC Milling”, 5th International Mechanical Engineering Congress, 9-10th May, 2015, Karachi, Pakistan.
5. A. Ahmed, Z. C. Chen, “A comprehensive approach to determining minimum cutter lengths for five-axis milling”, International Journal of Advanced Manufacturing Technology, online, Springer, 2016.
Dr. Sheheryar Mohsin Qureshi
1. Siddiqui, M. Ali, S. M. Qureshi, S. I. Mari, M. S. Memon, and M.B. Ramzan, “Competency Framework Validation: Application in Textile Industry.” Industria Textila Journal (accepted for publication in issue 5/2021).
2. S. I. Mari, S. Irshad, M. S. Memon, M. B. Ramzan, S. M. Qureshi, M. W. Iqbal, “Interactive Fuzzy Multi Criteria Decision Making Approach for Supplier Selection and Order Allocation in a Resilient Supply Chain.” Mathematics, 7.2 (2019): 137.
3. Ramzan, M. Babar, S. M. Qureshi, S. I. Mari, M. S. Memon, M. Mittal, M. Imran, M. W. Iqbal. “Effect of Time-Varying Factors on Optimal Combination of Quality Inspectors for Offline Inspection Station” Mathematics, 7.1 (2019): 51.
4. Ramzan, M. Babar, S. M. Qureshi, M. Ullah, M. S. Memon, and M. A. Siddiqui, “Assessment of the Extent of Implementation of QMS and COQ Concepts – A Case from a Developing Country”,The Journal of Engineering Research, 14.2 (2017): 145-155.
5. M. A. Siddiqui, S. M. Qureshi, M. Fahad, “Building on Technical Competencies”, International Conference on Applied Mechanics and Industrial Systems, Oman, 2016.
6.Muhammad Midhat Ali, M. Fahad, S. M. Qureshi, “Technical Competency Framework: Development and Implementation”, 6th International Mechanical Engineering Congress on Green Systems and Innovation, IEP, Karachi, Pakistan; 07/2016
7. S. M. Qureshi, M. A. Siddiqui, M. B. Ramzan, M. Ullah, M. S. Memon, M. A. Siddiqui “Assessment of the Extent of Implementation of QMS and COQ Concepts – A Case from a Developing Country”, International Conference on Applied Mechanics and Industrial Systems, Oman 2016.
8. Z. Huda , S. M. Qureshi ,“Quality Assurance in Manufacturing” Foundations of Materials Science and Engineering Vol. 93, Chapter 19 Trans Tech Publications, Switzerland.2016 ISBN: 978-3-03835-721-6
9. S. M. Qureshi, C. W. Kang, "Analysing the organizational factors of project complexity using structural equation modelling." International Journal of Project Management 33.1 (2015): 165-176.
10. S. M. Qureshi, S. Majeed, R. Khalid. "Where do we stand in cost of quality awareness?-Pakistan's case." International Journal of Quality Engineering and Technology 4.4 (2014): 273- 289.
11. S. M. Qureshi, C. Kang, “Project Management: simplifying or exacerbating?" Journal of Society of Korea Industrial and Systems Engineering 37.2 (2014): 9-18.
12. M. Ullah, C. Kang, and S. M. Qureshi, “A Study of Inventory Models for Imperfect Manufacturing Setup Considering Work-in-Process Inventory" Journal of Society of Korea Industrial and Systems Engineering 37.4 (2014): 231-238.
13. S. M. Qureshi, and C. Kang. “A Conceptual Model for Assessing Complexity in Managing Projects Using Structural Equation Modelling Technique.” Korean Society of Project Management Spring-2013 Conference, Seoul, Korea.
14. S. M. Qureshi, and C. Kang. “Project Management: simplifying or exacerbating?” Society of Korea Industrial and Systems Engineering Fall-2013 Conference, Seoul, Korea.
15. S. M. Qureshi, and C. Kang. “Assessment of the Understanding of Quality Management System and Cost of Quality Programme in Pakistani Manufacturing and Service Industry” Society of Korea Industrial and Systems Engineering Fall-2014 Conference, Seoul, Korea.
16. M. Ullah, C. Kang, and S. M. Qureshi. “A Study of Inventory Models for Imperfect Manufacturing Setup Considering Work-in-Process Inventory" Society of Korea Industrial and Systems Engineering Fall-2014 Conference, Seoul, Korea.
17. S. M. Qureshi, and C. Kang. “Evaluating the Understanding of Quality Management System and Cost of Quality Programme in Pakistani Industry - an Empirical Study.” Korean Society of Quality Management Fall-2014 Conference, Seoul, Korea.
Dr. Asim Zaheer
1. A.Fatima, A. Zaheer, M. Fahad, “Comparative performance analysis of micro-structured carbide inserts in machining of EN19 alloy steel”. Journal of The Brazilian Society of Mechanical Sciences and Engineering, 41, 405, 2019.
2. A. Zaheer, A. Yoxall & J Rowson,“Ergonomics approach to assess the risk associated with the performance of domestic tasks–part “B”. International Journal of Public Health and Clinical Sciences, 6(2), 132, 2019.
3. A. Zaheer, A. Yoxall & J Rowson,“Ergonomics approach to assess the risk associated with the performance of domestic tasks–part “A”. International Journal of Public Health and Clinical Sciences, 5(5), 228-245, 2018.
4. A. Zaheer, M. Carre, A. Yoxall., and J. Rowson, “Evaluation of adopted postures and the hardest part of the domestic laundry task”, Sheffield, UK: Proceedings of the Third European Conference on Design4Health 2015.
5. A. Zaheer, M. Carre, A. Yoxall., and J. Rowson, “Survey Based Study on Domestic Laundry Task. Sheffield: The University of Sheffield”.
6. A. Zaheer and R. Khalid, “Ergonomics: A workplace realities in Pakistan” International Poster Journal of Science and Technology, Vol. 2, Issue 1, April 2012, pp. 1-11. Published by Biosmass Conversion Research Centre, COMSATS Institute of Information Technology, Vehari, Pakistan. ISSN: 2224-5618.
7. S.Perween, A. Zaheer, and R. Khalid, “Classification and Balancing of an Automotive Assembly Line”, International Asia Conference on Industrial Engineering and Management Innovation (IEMI2012) Proceedings 2012: Changsha, China.
Dr. Anis Fatima
1. A.Fatima , A. Ahmed, S. Yaqoob, M. Fahad, “Wear comparison of unstructured and structured tungsten carbide”. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 234(10), 1658–1668, 2020. https://doi.org/10.1177/1350650120923533
2. A.Fatima, A. Zaheer, M. Fahad, “Comparative performance analysis of micro-structured carbide inserts in machining of EN19 alloy steel”. Journal of The Brazilian Society of Mechanical Sciences and Engineering, 41, 405, 2019.
3.A.Fatima , S.A. Iqbal, “Identifying direct electrical energy demand in wire-cut EDM” Mehran University research journal, 2020. https://doi.org/10.22581/muet1982.2001.16
4. A.Fatima , P. T. Mativenga, “Experimental study on cutting performance comparison of structured cutting tools in machining of AISI/SAE 4140”. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2019. DOI: 10.1177/0954405417731464
5. A.Fatima , P. T. Mativenga, “On the comparative cutting performance of nature inspired structured cutting tool in dry cutting of AISI/SAE 4140”. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, DOI: 10.1177/0954405415617930
6. A.Fatima, P. T. Mativenga, “A comparative study on cutting performance of rake- flank face structured cutting tool in orthogonal cutting of AISI/SAE 4140”. The International Journal of Advanced Manufacturing Technology, 2015, vol. 78 (9): 2097-2106.
7. A.Fatima, P. T. Mativenga “ Performance of flank face structured cutting tools in machining of AISI/SAE 4140 over a range of cutting speeds”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 230 (1): 3-18,2016.
8. A.Fatima , D. J. Whitehead and P. T. Mativenga, “Femtosecond laser surface structuring of carbide tooling for modifying contact phenomena”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 228(11): 1325-1337, 2014.
9. A.Fatima , P. T. Mativenga, “Assessment of tool rake surface structure geometry for enhanced contact phenomena”. The International Journal of Advanced Manufacturing Technology, 1-6, 2013.
10. A.Fatima , P. T. Mativenga, “A review of tool–chip contact length models in machining and future direction for improvement” , Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227(3): 345-356, 2013.
Ms. Shaheen Perween
1. S. Perween, A. Zaheer, and R. Khalid, “Classification and Balancing of an Automotive Assembly Line.” Paper accepted at the 19th International Conference on Industrial Engineering and Engineering Management IE&EM, October 27-28, 2012, and proceedings will be published in IEEE Xplore.
Ms. Javeria Younus
1. J. Younus, M. Fahad, and M. A. Khan, “Evaluation and benchmarking of maintenance organization and planning/scheduling at automotive industries in Pakistan,” presented at the 13th Global Conference on Sustainable Manufacturing, 2015.
2. J. Younus, M. Fahad, and M. A. Khan, “Evaluation of maintenance management practices in automotive industries of Pakistan,” presented at the 5th international mechanical engineering congress, 2015.
Dr. Shakeel Ahmed
1. A. Shakeel, D. T. Asquith, “Strain measurement of a thin hyperelastic polymer sheet using 3D-Digital Image Correlation and Bulge Test”
2. J. Corden, G. Carlson, I. Hardman, K. Heaton, A. Alderson, D. Asquith, A. Shakeel (2019). Lumen Constriction Band. Wo2017149322.
Ms. Saima Yaqoob
1. A.Fatima , A. Ahmed, S. Yaqoob, M. Fahad, “Wear comparison of unstructured and structured tungsten carbide“. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 234(10), 1658–1668, 2020. https://doi.org/10.1177/1350650120923533
2. M. Wasif, S.A. Iqbal, A. Fatima, S. Yaqoob, M. Tufail, “Experimental Investigation for the Effects of Wire EDM Process Parameters over the Tapered Cross-Sectional Workpieces of Titanium Alloys (Ti6Al-4V)”, Mechanical Sciences, vol. 11, issue 1, page 221-232, 2020.
3. S. Yaqoob, M.K. Azam, “Research activities in industry 4.0 function as enablers for agile manufacturing implementation”, 2nd Asia International Multidisciplinary Conference, Malaysia 12-13 May 2018.
4. M.K. Azam, S. Yaqoob “Closed loop supply chain-practical implementation in a university environment”, International conference on innovation and immerging trends in business management, education and social sciences 2018.
Mr. Hamood Ur Rehman
1. H.U. Rehman,“Process Planning Optimization of Die and Mold Design and Manufacture – An expert system Approach”, MSc thesis, Budapest University of Technology and Economics, Budapest Hungary.