Publications

Prof. Dr. Muhammad Tufail

  1. M.A. Khan, M. Wasif, M. Tufail, S.A. Iqbal, Irshadullah, “Impact of Process Parameters on the Surface Integrity of    Fiber Reinforced Composites (FRC) during the Milling Process,” accepted in Journal of Space Technology (HEC “X” Category Journal), May 2020.
  2. M. Wasif, S.A. Iqbal, A. Fatima, S. Yaqoob, M. Tufail, “Experimental Investigation for the Effects of Wire EDM Process Parameters over the Tapered Cross-Sectional Workpieces of Titanium Alloys (Ti6Al-4V),”, Mechanical Sciences, vol. 11, issue 1, page 221-232, 2020.
  3. M. Wasif, S. A. Iqbal, M. Tufail, H. Karim, "Experimental Analysis and Prediction of Springback in V-bending Process of High-Tensile Strength Steels," Transactions of the Indian Institute of Metals, 73, pages285–300, 2019.
  4. Irshad Ullah, M. Tufail, M. Wasif, “Experimental Investigation of Cutting Parameters Effects on the Surface Roughness and Tools Wear during the Drilling of Fiber Reinforced Composite Materials,” Mehran University Research Journal of Engineering and Technology (HEC “X” Category Journal), vol. 38, Issue 3, 2019.
  5. M. Wasif, S. A. Iqbal, A. Ahmed, M. Tufail, M. Rababah, "Optimization of simplified grinding wheel geometry for the accurate generation of end-mill cutters using the five-axis CNC grinding process," International Journal of Advanced Manufacturing Technology, vol. 105, page 4325-4344, 2019.
  6. M. Tufail, S. H. Lodi, “Implementation of Quality Standard In Educational Institutions”, International Seminar on Higher Education in the Muslim World: Challenges and Prospects, 24th – 25th March 2008, Kuala Lumpur, Malaysia.
  7. M. Tufail, “Processing Investigation and Optimization for Hybrid Thermoplastic Composites”, Journal of University of Science and Technology Beijing April 2007, Volume 14, Issue 2, pp. 185-189
  8. M. Tufail, “Processing Investigation and Optimization for Hybrid Thermoplastic Composites”, Journal of University of Science and Technology Beijing April 2007, Volume 14, Issue 2, pp. 185-189.
  9. M. Tufail, S. H. Lodi, “ISO 9001 Certification for Higher Educational Institutions in Pakistan”, 1st International Conference on Assessing Quality in Higher Education (1st ICAQHE, 2006), 11th -13th December 2006, Lahore.
  10. M. Tufail, “Consolidation Modeling of Fibre Reinforced Thermoplastic Composite Materials”, 9th International Symposium on Advanced Materials, Dr A Q Khan Research Laboratories Kahuta, 19-22 September 2005, Islamabad.
  11. M. Tufail, “Consolidation Modeling of Fibre Reinforced Thermoplastic Composite Materials”, 9th International Symposium on Advanced Materials, Dr A Q Khan Research Laboratories Kahuta, 19-22 September 2005, Islamabad.
  12. M. Tufail, “Fabrication and Mechanical Testing of Fibre Reinforced Thermoplastic Composite Tubes”, 9th International Symposium on Advanced Materials, Dr A Q Khan Research Laboratories Kahuta, 19-22 September 2005, Islamabad.
  13. M. Tufail, A. C. Long, C. D. Rudd, “Mechanical Properties of Braided Commingled Glass/Polypropylene Composites”, 8th International Symposium on Advanced Materials, Dr A Q Khan Research Laboratories Kahuta, 8-11 September 2003, Islamabad.
  14. M. Tufail, A. C. Long, C. D. Rudd, “Optimization of Braiding and Consolidation Processes for Commingled Glass / Polypropylene Composites”, 1st International Mechanical Engineering Congress by Institute of Engineers, Pakistan, 26th – 28th May 2001, Karachi.
  15. M. Tufail, A. C. Long, C. D. Rudd, “Effects of Consolidation Process on Microstructure and Mechanical Properties of Commingled Glass/Polypropylene Composites”, 7th International Symposium on Advanced Materials, Dr A. Q. Khan Research Laboratories Kahuta, 17-21 September 2001, Islamabad.
  16. M. Tufail, P. R. S. Rashidi, “Rapid Prototype Tooling Using Castable Ceramics”, Mehran University Research Journal of Engineering and Technology, Vol. 20, No 1, January 2001, pp. 51-56.
  17. M. Tufail, P. R. S. Rashidi, “Consolidation of Commingled Thermoplastic Composite”, Journal of Engineering & Applied Sciences, NWFP University of Engineering & Technology Peshawar, Vol. 20, No. 2 July – Dec 2001, pp. 69-75.
  18. A. Al-Hamdan, M. Tufail, A. C. Long, C. D. Rudd, “Skin Thickness Variation During Resin Transfer Moulding of Sandwich Structures”, Advanced Composites Letters, Vol.4 No. 5, 1995, pp.157-161.
  19. A. Al-Hamdan, M Tufail, A. C. Long & C. D. Rudd, “Effects of Process Parameters on Core Movement during Liquid Composite Moulding using Incompressible Cores”, 4th International Conference on Automated Composites, 6-7 September 1995, Nottingham, UK.

Prof. Dr. Syed Amir Iqbal

  1. S. A. Iqbal, P. T. Mativenga, M. A. Sheikh, “An evaluation of flow stress material models of AISI1045 for high-speed machining”, 331-336, in proc. 4th International Conference on Manufacturing Research 2006, Liverpool, UK.
  2. S. A. Iqbal, P. T. Mativenga, M. A. Sheikh, “Characterization of the Machining of AISI 1045 steel over a wide range of cutting speeds-Part 1: Investigation of contact phenomena”, 909-916, 221(5), Proceedings of IMechE Part B: Journal of Engineering Manufacture. 2007
  3. S. A. Iqbal, P. T. Mativenga, M. A. Sheikh, “Characterization of the Machining of AISI 1045 steel over a wide range of cutting speeds-Part 2: Evaluation of flow stress models and interface friction distribution schemes”, 917-926, 221(5), Proceedings of IMechE Part B: Journal of Engineering Manufacture, 2007
  4. S. A. Iqbal, P. T. Mativenga, M. A. Sheikh, “Contact length prediction: mathematical models and effect of friction schemes on FEM simulation for conventional to HSM of  AISI 1045 steel”, 3(1/2), 18-33, Int. J. Machining and Machinability of Materials, 2008.
  5. S. A. Iqbal, P. T. Mativenga, M. A. Sheikh, “A comparative study of tool chip contact length of two engineering alloys for a wide range of cutting speeds”, Intl. J. Advanced Manufacturing Technology, 05/2008; 42(1):30-40.
  6. S. A. Iqbal, P. T. Mativenga, M. A. Sheikh, “A sensitivity study of the effects of interface heat transfer coefficient on FE modelling of machining process for a wide range of cutting speeds”, 6th International Conference on Manufacturing Research – ICMR-2008, 9-11 September 2008, Brunel University, Middlesex, UK.
  7. S. A. Iqbal, P. T. Mativenga, M. A. Sheikh, “An investigative study of interface heat transfer coefficient for the FE modelling of High-Speed Machining process”, 1405-1416, 222, Proc. IMechE Part B: Journal of Engineering Manufacture, 2008
  8. M. Salman, S. A. Iqbal, and R. Khalid Implementing Supply Chain Operation Reference (SCOR) Model in Manufacturing Firm of a Developing Country, 1045-1055, in proc. The 19th International Conference on Industrial Engineering and Engineering Management, October 27-28, 2012, Beijing, China, Springer.
  9. A. Zulqarnain, S. A. Iqbal and R. Khalid, Implementing Six Sigma methodology in a developing country, International Journal of Process Management and Benchmarking, Vol. 3, No. 3, 314–333. (2013).
  10. S. M. Hasan, M. Wasif, and S. A. Iqbal. A Collaborative Framework for Product Development in Extended Enterprise, 71-76 International Conference on Emerging Trends in Engineering and Technology (ICETET'2013) Dec. 7-8, 2013, Patong Beach, Phuket (Thailand)
  11. M. Wasif, Z. C. Chen, S. M. Hasan and S. A. Iqbal. An Accurate Cutter-head Geometry for the CNC Face-milling of Hypoid Gears. 77-83International Conference on Emerging Trends in Engineering and Technology (ICETET'2013) Dec. 7-8, 2013, Patong Beach, Phuket (Thailand)
  12. S. M. Hasan, J. Gao, M. Wasif and S. A. Iqbal. An Integrated Decision-Making Framework for Automotive Product Development with the Supply Chain, the 8th International Conference on Digital Enterprise Technology - DET 2014 held in March 25th –28th, 2014 in Stuttgart, Germany. Paper appeared in Procedia CIRP 25 (2014) 10 -18
  13. Tahir Mumtaz Malik, Rameez Khalid, Ali Zulqarnain, S. A. Iqbal, (2016) "Cost of quality: findings of a wood products ' manufacturer", The TQM Journal, Vol. 28 Issue: 1, pp.2-20, https://doi.org/10.1108/TQM-01-2014-0014
  14. Aqeel Ahmed, Liming Wang, S. A. Iqbal, “An Efficient Method of Collision Detection For 5-axis CNC Milling”, 5th International Mechanical Engineering Congress, 9-10th May 2015, Karachi, Pakistan.
  15. M. Rababah, M. Wasif, A. Ahmed, S. A. Iqbal, (2017) “Accurate Machine-Settings for the Face Milling of Hypoid Gears”, International Review of Mechanical Engineering, Vol. 11, No. 12, page 1-12, Praiseworthy Prize, 2018. (DOI 10.15866/ireme. v11i12.14194)
  16. Irshad Ullah, Muhammad Wasif, Muhammad Tufail, Muhammad Adnan Khan, and S. A. Iqbal, Experimental Investigation of Cutting Parameters Effects on the Surface Roughness and Tools Wear during the Drilling of Fibre Reinforced Composite Materials, Vol. 38 no. 3717-728, Mehran University Research Journal of Engineering & Technology’ (HEC – X category Journal) in 2018
  17. A. Fatima and S. A. Iqbal, Identifying direct electrical energy demand in wire cut EDM. Accepted for Publication in Mehran University Research Journal of Engineering & Technology’ (HEC – X category Journal) in 2018
  18. M. Wasif, S. A. Iqbal, A. Ahmed, M. Tufail, M. Rababah, "Optimization of simplified grinding wheel geometry for the accurate generation of end-mill cutters using the five-axis CNC grinding process", International Journal of Advanced Manufacturing Technology, 105, page pages4325–4344, 2019.
  19. M. Rababah, M. Wasif, A. Ahmed, S. A. Iqbal, “Accurate Machine-Settings for the Face-Milling of Hypoid Gears”, International Review of Mechanical Engineering (IREME), Vol. 11, No. 12, page 931-944, 2018. (Scopus)
  20. M. Wasif, S.A. Iqbal, M. Tufail, H. Karim, "Experimental Analysis and Prediction of Springback in V-bending Process of High-Tensile Strength Steels", Transactions of the Indian Institute of Metals, Vol. 73, pages 285-300, 2020.
  21. M. Rababah, M. Wasif, & S.A. Iqbal, "Parametric relationship between hypoid gear teeth and accurate face-milling cutter", Advances in Manufacturing, Vol. 8, pages 537-555, 2020. https://doi.org/10.1007/s40436-019-00286-x.
  22. M. Wasif, S.A. Iqbal, A. Fatima, S. Yaqoob, M. Tufail, “Experimental Investigation for the Effects of Wire EDM Process Parameters over the Tapered Cross-Sectional Workpieces of Titanium Alloys (Ti6Al-4V)”, Mechanical Sciences, Vol. 11, issue 1, page 221-232, 2020. https://doi.org/10.5194/ms-11-221-2020.
  23. M.A. Khan, M. Wasif, M. Tufail, S.A. Iqbal, Irshadullah, “Impact of Process Parameters on the Surface Integrity of Fiber Reinforced Composites (FRC) during the Milling Process,” Journal of Space Technology, Vol. 10, issue 1, pages 64-74, 2021. https://ist.edu.pk/jst-previous-issues-july-2020
  24. A. Ahmed, M. Wasif, A. Fatima, L. Wang, S. A. Iqbal, “Determination of the feasible setup parameters of a workpiece to maximize the utilization of a five-axis milling machine”, Frontiers of Mechanical Engineering, Vol. 16, pages 298–314, 2021. https://doi.org/10.1007/s11465-020-0621-3.
  25. M. Wasif, A. Fatima, S. A. Iqbal, M. Tufail, H. Karim, “Analysis and Optimization of Spring back during the V-bending of Hot-Rolled High Strength Steels (JSH440)”, Journal of Engineering Research, online available on 27-10-2021. https://doi.org/10.36909/jer.11027
  26. M. Wasif, S. A. Iqbal, Y. A. Khan, M. Tufail, “Analysis and Multi-Objective Optimization of Wire Cut Process Parameters for Efficient Cutting of Tapered Carbon Steels Using Wire EDM”, Journal of Engineering Research, online available on 03-11-2021. https://doi.org/10.36909/jer.11965
  27. M. Wasif, A. Fatima, A. Ahmed, S. A. Iqbal, “Investigation and Optimization of Parameters for the Reduced Springback in JSC-590 sheet metals occurred during the V-bending Process”, Transaction of Indian Institute of Metals, Vol 74, page 2751–2760. https://doi.org/10.1007/s12666-021-02357-9.
  28. Rehman, F. Boor, M. Wasif, S. A. Iqbal, “A Novel Method for Process Planning of Die and Mould Manufacturing using Expert System Approach”, Transactions of Famena, accepted on 13-09-21.
  29. M. Wasif, Y. A. Khan, A. Zulqarnain, S. A. Iqbal, “Analysis and Optimization of Wire Electro-Discharge Machining Process Parameters for the Efficient Cutting of Aluminium 5454 Alloy”, Alexandria Engineering Journal, available online, 2021. https://doi.org/10.1016/j.aej.2021.11.048
  30. Noor, K., Siddiqui, M.A. & Iqbal, S.A. Multi-objective Optimization of Parameters in CNC Turning of a Hardened Alloy Steel Roll by Using Response Surface Methodology. Arab J Sci Eng (2022). https://doi.org/10.1007/s13369-022-07117-5
  31. A. Zulqarnain, M. Wasif, S. A. Iqbal,  “Developing a Quality 4.0 Implementation Framework and Evaluating the Maturity Levels of Industries in Developing Countries”, Sustainability 2022, 14(18), 11298; https://doi.org/10.3390/su141811298 - 08 Sep 2022

Dr. Maqsood Ahmed Khan

  1. H. Arif, A. Shah, T. A. Hussain Ratlamwala, K. Kamal, and Maqsood. Ahmed, “Stirnol Engine: A combination of Nitinol (shape memory alloy) and Gamma Stirling Engine” Revista Mexicana de Física 2023, vol. 69 No. 3.
  2. Arif H, Shah A, Ratlamwala TAH, Kamal K, Khan MA. Effect of Material Change on Stirnol Engine: A Combination of NiTiNOL (Shape Memory Alloy) and Gamma Stirling Engine. Materials. 2023; Vol. 16, issue 8, 3257.
  3. Muhammad Fahad, Maqsood Ahmed Khan & Marianne Gilbert, “Investigation of Thermal Gel Formation of Methylcellulose in Glycols Using DSC and XRD” Gels 2021, 7, 205.
  4. Muhammad Fahad, Mona Mujeeb & Maqsood Ahmed Khan “Effect of Process Parameters on the Compressive and Impact Strength of 3D Printed Parts” Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, 2022.
  5. Shaheen Perween, Muhammad Fahad & Maqsood A. Khan, “Systematic Experimental Evaluation of Function Based Cellular Lattice Structure Manufactured by 3D Printing” Appl. Sci. 2021, 11, 10489
  6. Shaheryar A. Khan, Bilal A. Siddiqui, Muhammad Fahad & Maqsood A. Khan, “Evaluation of the Effect of Infill Pattern on Mechanical Strength of Additively Manufactured Specimen” Materials Science Forum, 2017, Vol. 887, pp. 128-132, DOI: 10.4028/www.scientific.net/MSF.887.128.
  7. Muhammad Fahad, Mahmood Khalid, Muhammad Nauman & Maqsood A. Khan, “Effect of deposition speed on the flatness and cylindricity of parts produced by three-dimensional printing process” Journal of Physics: Conference Series 885 (2017) 012012, 10.1088/1742- 6596/885/1/012012.
  8. Shaheen Perween, Muhammad Fahad, & Maqsood Ahmed Khan: A Review of Process Development Strategies in 3D Printing, Conference on Emerging Trends in Automotive Engineering (CETAE-17), Karachi, Pakistan, 12/2017.
  9. Muhammad Haris Yousuf, Muhammad Fahad, & Maqsood Ahmed Khan: Build Plate Levelling of a 3D Printer, Conference on Emerging Trends in Automotive Engineering (CETAE-17), Karachi, Pakistan, 12/2017.
  10. Z. C. Chen, Maqsood A. Khan, “A new approach to generating arc length parameterized NURBS tool paths for efficient three-axis machining of smooth, accurate sculptured surfaces” International journal of Advanced Manufacturing Technology, 2014, Vol. 70, 1355-1368.
  11. Z. C. Chen, Maqsood A. Khan, “Piecewise B-Spline Tool Paths with the Arc-Length Parameter and Their Application on High Feed, Accurate CNC Milling of Free-Form Profiles”, Trans. ASME J. Manuf. Sci. Eng., 2012, Vol. 134 / 031007-13.
  12. Maqsood A. Khan, Z. C. Chen, “Approximation of planar offset curves with globally bounded error for B-spline NC tool paths”, International Journal of Production Research, 2011, 1-15, iFirst.
  13. Javeria Younus, Muhammad Fahad, Maqsood Ahmed Khan, "Evaluation of Maintenance Management Practices in Automotive Industries of Pakistan", Proceedings of 5th International Mechanical Engineering Congress, 9th - 10th May 2015, Pakistan.
  14. Javeria Younus, Muhammad Fahad, Maqsood A. Khan,” Evaluation and benchmarking of maintenance organization and planning/scheduling at Automotive Industries of Pakistan”, 13th Global Conference on Sustainable Manufacturing, 16 – 18 September 2015, Binh Duong New City, Vietnam.
  15. R. Siddiqui, M. Pinto, H. Rehman, Maqsood A. Khan, “Tool Path Generation for Complex Surface Machining, Using Point Cloud Data” 12th Global Conference on Sustainable Manufacturing, 22 - 24 September 2014, Johor Bahru, Malaysia.
  16. M. Fahad, M. A. Khan, M. Gilbert, "Evaluation of Thermal Gelation of F-127 in a Non-Aqueous Solvent and its Suitability as a Support Material for Additive Manufacturing", Advanced Materials Research, Vol 911, pp. 226-231, Mar. 2014.
  17. Maqsood A. Khan, Z. C. Chen, “CL-Path in B-Spline Form with Global Error Control for 3-Axis Sculptured Surface Machining”, Proceedings of the 2nd International Conference on Mechanical, Production and Automobile Engineering (ICMPAE'2012), April 28-29, 2012, Singapore.
  18. Maqsood A. Khan, Z. C. Chen, “An Integrated Approach to Generating Accurate NURBS Cutter Location Path with Approximate Arc Length Parameter”, Proceedings of the 2nd International CIRP Process Machine Interaction (PMI) Conference, June 7-9, 2010, Victoria, British Columbia, Canada.
  19. Maqsood A. Khan, Z. C. Chen, “A new Approach to Generating Accurate NURBS Cutter Location paths with Arc Length Parameter”, Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, August 15-18, 2010, Montreal, Quebec, Canada.
  20. Maqsood A. Khan, Z. C. Chen, “An Effective Approach to Approximating 2-D Free-Form Curve Offsets for B-Spline NC Tool Paths with Offset Error Globally Bounded”, Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, August 15-18, 2010, Montreal, Quebec, Canada.
  21. Maqsood A. Khan, Z. C. Chen, “Arc-length parameterized NURBS path interpolation for high speed and precision machining”, Proceeding of the 19th International Symposium on Air Breathing Engines, September 13-19, 2009, Montreal, Quebec, Canada.

Dr. Muhammad Wasif

  1. Hasan SM, Wasif M, Iqbal SA. A Collaborative framework for Product Development in Extended Enterprise". In: International Conference on Emerging Trends in Engineering and Technology (ICETET’2013), Dec 7-8. Patong Beach, Phuket (Thailand; 2013).
  2. Zubair R, Hasan SM, Wasif M, Khan SA. A Conceptual Framework to Integrate New Product Development and Supply Chain Management with Organizational Business Flow in an Extended Environment”. International Journal of Business Performance and Supply Chain Modelling. 2021; 12:129-146.
  3. Chen ZC, Wasif M. A Generic and Theoretical Approach to Programming and Post-Processing for Hypoid Gear Machining on Multi-Axis CNC Face-Milling Machines”. International Journal of Advanced Manufacturing Technology. 2015; 81:135-148,.
  4. Rababah M, Wasif M, Omari M, Mutawe S. A Novel Approach to Profile-Milling for End-Mill Flutes in 4-Axis CNC Turn-Milling Machines, Part I: Mathematical Modeling”. International Review of Mechanical Engineering (IREME. 2019; 13:133-141,.
  5. Rababah M, Wasif M, Omari M, Mutawe S. A Novel Approach to Profile-Milling for End-Mill Flutes in 4-Axis CNC Turn-Milling Machines, Part II: Simulation and Verification”. International Review of Mechanical Engineering (IREME. 2019; 13:203-211,.
  6. Rehman H, Boor F, Wasif M, Iqbal SA. A Novel Method for Process Planning of Die and Mould Manufacturing using Expert System Approach”. Transactions of FAMENA. 2022; 54:105-130.
  7. Lodi SA, Shaikh AA, Wasif M, Butt FA. A Quality 4.0 Assurance Framework for the Higher Education Institutes”. In: Proceeding of 8th International Conference on Higher Education Advances (HEAd’22). Valencia, Spain; 2022. p. 14–7.
  8. Irshadullah MW, Fatima A, Tufail M. Accurate additively manufactured PETG molds for the composite manufacturing”. In: Proceeding of 1299th International Conference on Science, Engineering & Technology - ICSET 2023. Istanbul, Turkey; 2023. p. 20–1.
  9. Rababah M, Wasif M, Ahmed A, Iqbal SA. Accurate Machine-Settings for the Face-Milling of Hypoid Gears”. International Review of Mechanical Engineering (IREME. 2018);11(12):931-944.
  10. Wasif M, Chen ZC. An accurate approach to determine the cutting system for the face milling of hypoid gears”. International Journal of Advanced Manufacturing Technology. 2016; 84:1873-1888,.
  11. Wasif M, Chen ZC, Hasan SM. An Accurate Cutter-head Geometry for the CNC Face-milling of Hypoid Gears”. In: International Conference on Emerging Trends in Engineering and Technology (ICETET’2013), Dec 7-8. Patong Beach, Phuket (Thailand; 2013.
  12. Hasan SM, Gao J, Wasif M, Iqbal SA. An Integrated Decision-Making Framework for Automotive Product Development with the Supply Chain”. In: 8th International Digital Enterprise Technology (DET) Conference. Stuttgart – Germany; 2014.
  13. Wasif M, Iqbal SA, Khan YA, Tufail M. Analysis and Multi-Objective Optimization of Wire Cut Process Parameters for Efficient Cutting of Tapered Carbon Steels Using Wire EDM”. Journal of Engineering Research published online [Internet]. 2021; Available from: https://doi.org/10.36909/jer.11965.
  14. Wasif M, Fatima A, Iqbal SA, Tufail M, Karim H. Analysis and Optimization of Springback during the V-bending of Hot-Rolled High Strength Steels (JSH440)”. Journal of Engineering Research published online [Internet]. 2021; Available from: https://doi.org/10.36909/jer.11027.
  15. Wasif M, Khan YA, Zulqarnain A, Iqbal SA. Analysis and Optimization of Wire Electro-Discharge Machining Process Parameters for the Efficient Cutting of Aluminum 5454 Alloy”. Alexandria Engineering Journal. 2022; 61:6191-6203.
  16. Rababah M, AL-Oqla FM, Wasif M. Application of analytical hierarchy process for the determination of green polymeric-based composite manufacturing process". International Journal on Interactive Design and Manufacturing. 2022;(IJIDeM), Vol. 16:943-954.
  17. Wasif M, Chen ZC. Cutter radius and blade angle selection model for the high-speed face milling of hypoid gear”. In: International conference on virtual machining process technology (VMPT 2012). Montreal; 2012.
  18. Wasif M, Rababah M, Hasan SM, Iqbal SA. Determination of Accurate Machine-Settings for the Face-Milling of Hypoid Gear”. In: 5th International Mechanical Engineering Congress, 9- 10th May 2015. Karachi, Pakistan.
  19. Wasif M, Chen ZC, Hasan SM. Determination of Cutter-Head Geometry for the Face-Milling of Hypoid Gears”. International Journal of Advanced Manufacturing Technology. 2016; 86:3081-3090,.
  20. Ahmed A, Wasif M, Fatima A, Wang L, Iqbal SA. Determination of the feasible setup parameters of a workpiece to maximize the utilization of a five-axis milling machine”. Frontiers of Mechanical Engineering. 2021; 15:298–314.
  21. Zulqarnain A, Wasif M, Iqbal SA. Developing a Quality 4.0 Implementation Framework and Evaluating the Maturity Levels of Industries in Developing Countries”. Sustainability. 2022; 14:11298.
  22. Kashif M, Wasif M, Fatima A, Iqbal SA. Effect of water content on process parameter optimization for enhanced surface finish of Kevlar composite”. In: Proceeding of 1299th International Conference on Science, Engineering & Technology - ICSET 2023. Istanbul, Turkey; 2023. p. 20–1.
  23. Shaikh AA, Wasif M, Uddin R. Excellence in Quality Education through Implementation of Strategic Framework and SMART KPIS in Higher Education Institute". In: Proceedings of 174th ISERD International Conference. New York, USA; 2019.
  24. Wasif M, Iqbal SA, Tufail M, Karim H. Experimental Analysis and Prediction of Springback in V-bending Process of High-Tensile Strength Steels". Transactions of the Indian Institute of Metals. 2020; 73:285-300,.
  25. Wasif M, Iqbal SA, Fatima A, Yaqoob S, Tufail M. Experimental Investigation for the Effects of Wire EDM Process Parameters over the Tapered Cross-Sectional Workpieces of Titanium Alloys (Ti6Al-4V)”. Mechanical Sciences. 2020; 11:221-232,.
  26. Irshadullah MT, Wasif M. Experimental Investigation of Cutting Parameters Effects on the Surface Roughness and Tools Wear during the Drilling of Fiber Reinforced Composite Materials”. Mehran University Research Journal of Engineering and Technology (ESCI - Clarivate Analytics. 2019; 38:717-728.
  27. Wasif M, Shaikh AA, Butt FA, Safi S. Framework towards the Digital Universities: challenges and issues”. In: Proceeding of 3rd PNQAHE Conference on GOVERNANCE & QUALITY ASSURANCE IN HEIs. Khairpur, Pakistan; 2022. p. 8–10.
  28. Raza SH, Khalid R, Wasif M. Impact of Critical Risks on the Major Constraints of Small Engineering Projects". Mehran University Research Journal of Engineering and Technology (ESCI - Clarivate Analytics. 2021; 40:415-425,
  29. Khan MA, Wasif M, Tufail M, Iqbal SA, Irshadullah. Impact of Process Parameters on the Surface Integrity of Fiber Reinforced Composites (FRC) during the Milling Process. Journal of Space Technology. 2020; 10:64-74,
  30. Bhutto MA, Shaikh AA, Wasif M. Impact of Quality Enhancement Practices”. In: 1st International Conference on Quality Assurance at Higher Education. Hayatabad Peshawar: Khyber Medical University; 2017.
  31. Wasif M, Shaikh AA, Lodi SH, Bhutto MA, Riazuddin. Implementation of Risk Management System to Improve the Quality of Higher Education Institutes". In: ICHE 2018: 20th International Conference on Higher Education. Paris, France; 2018. p. 25-26.
  32. Bhutto MA, Shaikh AA, Wasif M, Uddin R. Implementing Quality Assurance in Universities/HEIs by Ensuring and Promoting Stakeholders. In: Trust”, presented in INQAAHE 15th Biennial Conference 2019. Colombo - Sri Lanka; 2019.
  33. Bhutto MA, Shaikh AA, Wasif M, Riazuddin. Improving Quality of the Academic Programs in Universities/HEIs through Self-Assessment Mechanism. In: LUMHS J, editor. Conference on Quality Assurance QCON ’17. 2017.
  34. Wasif M, Fatima A, Ahmed A, Iqbal SA. Investigation and Optimization of Parameters for the Reduced Springback in JSC-590 sheet metals occurred during the V-bending Process. Transaction of Indian Institute of Metals. 2021; 74:2751-2760,
  35. Wasif M, Chen ZC. Mathematical model of the pressure and spiral angles on hypoid gear teeth machined with industrial blade”. In: International conference on virtual machining process technology (VMPT 2012). Montreal; 2012.
  36. Fatima A, Wasif M, Mumtaz MO. Optimization of process parameters in turning of nuclear graded steel alloy (AISI-410) for sustainable manufacture”. Journal of Engineering Research published online [Internet]. 2021; Available from: https://doi.org/10.36909/jer.11239.
  37. Wasif M, Iqbal SA, Ahmed A, Tufail M, Rababah M. Optimization of simplified grinding wheel geometry for the accurate generation of end-mill cutters using the five-axis CNC grinding process". International Journal of Advanced Manufacturing Technology. 2019; 105:4325-4344.
  38. Rababah M, Wasif M, Iqbal SA. Parametric relationship between hypoid gear teeth and accurate face-milling cutter". Advances in Manufacturing. 2020; 8:537-555,.
  39. Shaikh AA, Wasif M, Bhutto MA, Uddin R. Risk-based approach and Smart KPIs for the Quality Assurance in Higher Education Institutions”. In: presented in 2nd International Conference on Quality Assurance at Higher Education – PNQAHE. Lahore: University of Education; 2019.
  40. Haroon S, Wasif M, Khalid R, Khalidi S. Supply chain practitioners’ perception on Sustainability: An empirical study”. Sustainability. 2021;13:9872,.
  41. Fatima A, Kamal A, Wasif M. Use of Taguchi experimental design in an offline optimization estimation of surface finish in machining”. In: Proceeding of 6th International Conference on Energy, Environment, and Sustainable Development (EESD), Jamshoro. Pakistan; 2022. p. 17-40.

Dr. Ali Zulqarnain

 

  1. Siddiqui, M.M.U.Z., Iqbal, S.A., Zulqarnain, A. and Tabassum, A., 2024. An investigative study on the parameters optimization of the electric discharge machining of Ti6Al4V. Clean Technologies and Recycling, 4(1), pp.43-60. doi: 10.3934/ctr.2024003
  2. Zulqarnain, A., Wasif, M. and Iqbal, S.A., 2022. Developing a quality 4.0 implementation framework and evaluating the maturity levels of industries in developing countries. Sustainability, 14(18), p.11298.https://doi.org/10.3390/su141811298
  3. Wasif, M., Khan, Y.A., Zulqarnain, A. and Iqbal, S.A., 2022. Analysis and optimization of wire Electro-Discharge Machining process parameters for the efficient cutting of Aluminum 5454 alloy. Alexandria Engineering Journal, 61(8), pp.6191-6203.https://doi.org/10.1016/j.aej.2021.11.048
  4. Jamil, M.S., Khalid, R., Zulqarnain, A. and Salman, M., 2018. Improving Thermoform Productivity: Case of Design-of-Experiment. J. Qual. Technol. Manag, 15, pp.87-106.http://pu.edu.pk/home/journal/22/Previous-Issue.html https://www.prdb.pk/article/improving-thermoform-productivity-case-of-design-of-experim-4615
  5. Malik, T.M., Khalid, R., Zulqarnain, A. and Iqbal, S.A., 2016. Cost of quality: findings of a wood products' manufacturer. The TQM Journal.https://doi.org/10.1108/TQM-01-2014-001
  6. Waseem, A., Zulqarnain, A., Khalid, R. and Saleem, S., 2015. Gauge repeatability and reproducibility: an assessment of method and medium for a laboratory. International Journal of Six Sigma and Competitive Advantage, 9(2-4), pp.126-149. https://doi.org/10.1504/IJSSCA.2015.074961
  7. Zulqarnain, A., Iqbal, S.A. and Khalid, R., 2013. Implementing Six Sigma methodology in a developing country. International Journal of Process Management and Benchmarking, 3(3), pp.314-333.https://doi.org/10.1504/IJPMB.2013.058158

Ms. Sadia Majeed

  1. S. Majeed , Z. Huda, “Economics of Manufacturing” Chapter of Book “   Materials Processing For Engineering Manufacture “Chapter 18 Trans Tech Publication 381-406 ,   978-3-03835-721-6
  2. S. M. Qureshi, S. Majeed, R. Khalid, “Where Do We Stand in Cost of Quality Awareness? Pakistan's Case”, International Journal of Quality Engineering and Technology, 4(4), 273-289, 2014.
  3. S. Majeed, Q. M. Ahmed, & M. S. Butt, “Total Factor Productivity in Pakistan revisited: A dual approach of productivity measurement”, Journal of Social Sciences & Interdisciplinary Research, 3(1), 21-36, 2014.

Dr. Aqeel Ahmed

  1. Aqeel Ahmed, Zezhong Chevy Chen, Liming Wang, “Safe and short tool length determination for 5-axis machining of sculptured surfaces”. Ist international conference on virtual machining process technology. CIRP sponsored conference in May, 2012.                            
  2. Liming Wang, Aqeel Ahmed, Zezhong Chevy Chen, “A parametric CAD model of end mill based on grinding processes” 1st international conference on virtual machining process technology. CIRP sponsored conference in May, 2012.
  3. Aqeel Ahmed, Z. C. Chen, “A Precise Approach for the Determination of the Setup Parameters to Utilize Maximum Work Space of 5-Axis Machine Tools”, International Journal of Advanced Manufacturing Technology, online, Springer, 2015.
  4. Aqeel Ahmed, Liming Wang, Syed Amir Iqbal, “An Efficient Method of Collision detection For 5-axis CNC Milling”, 5th International Mechanical Engineering Congress, 9-10th May, 2015, Karachi, Pakistan.
  5. Aqeel Ahmed, Z. C. Chen, “A comprehensive approach to determining minimum cutter lengths for five-axis milling”, International Journal of Advanced Manufacturing Technology, online, Springer, 2016.
  6. M. Rababah, M. Wasif, Aqeel Ahmed, S. A. Iqbal, “Accurate Machine-Settings for the Face-Milling of Hypoid Gears”, International Review of Mechanical Engineering, Vol. 11, No. 12, page 1-12, Praise Worthy Prize, 2018. (DOI 10.15866/ireme.v11i12.14194)
  7. Fatima, Aqeel Ahmed, Yaqoob, S., & Fahad, M. (2020). Wear comparison of unstructured and structured tungsten carbide. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 234(10), 1658–1668. https://doi.org/10.1177/1350650120923533
  8. M. Wasif, A. Fatima, A. Ahmed, S. A. Iqbal, “Investigation and Optimization of Parameters for the Reduced Spring back in JSC-590 sheet metals occurred during the V-bending Process” Transaction of Indian Institute of Metals, Vol. 74, page 2751–2760, 2021. https://doi.org/10.1007/s12666-021-02357-9. (HJRS “X” Category, JCR, Impact Factor 1.499)
  9. Aqeel Ahmed, Wasif, Muhammad, Fatima, Anis, Wang, Liming, Iqbal, Syed Amir. Determination of the feasible setup parameters of a work piece to maximize the utilization of a five-axis milling machine. Frontiers of Mechanical Engineering. 2021/03/18, 10.1007/s11465-020-0621-3

Dr. Asim Zaheer

  1. Zaheer, A., A. Fatima, and J. Rowson, Evaluating and Managing MSDs in Domestic Tasks through Ergonomics. Journal of Engineering Research (JER),2021.
  2. Zaheer A, Yoxall A & Rowson J (2019) Ergonomics approach to assess the riskassociated with the performance of domestic tasks–part “B”. International Journal of Public Health and Clinical Sciences, 6(2), 132.
  3. Zaheer A, Yoxall A & Rowson J (2018) Ergonomics approach to assess the risk associated with the performance of domestic tasks–part “A”. International Journal of Public Health and Clinical Sciences, 5(5), 228-245.
  4. Zaheer, A., A. Yoxall, and J. Rowson, Evaluation of Ergonomics Risk Factors and Physical Strain Within Home Environment. Design for Health, 2017. 1(2).
  5. Zaheer, A., M. Carre, A. Yoxall, and J. Rowson. Evaluation of adopted postures and the hardest part of the domestic laundry task. In Design4health. 2015. Sheffield, UK: Proceedings of the Third European Conference on Design4Health 2015.
  6. Zaheer, A., Carre, M., J., Rowson, J., 2014. Survey Based Study on Domestic Laundry Task. Sheffield: The University of Sheffield. 7. Zaheer, A. and R. Khalid, Ergonomics: A Work Place Realities in Pakistan. International Poster Journal of Science & Technology 2012. 2(1): p. 1-11.
  7. Shaheen Perween, Asim Zaheer, Dr. Rameez Khalid "Classification and Balancing of an Automotive Assembly Line", International Asia Conference on Industrial Engineering and Management Innovation (IEMI2012) Proceedings, Oct 27, 2012, Changsha, China.

Dr. Shaheen Perween

  1. S. Perween, Asim Zaheer, Rameez Khalid, “Classification and Balancing of an Automotive Assembly Line”, International Asia Conference on Industrial Engineering and Management Innovation (IEMI2012) Proceedings, page 429-438, Springer, 2013. (https://doi.org/10.1007/978-3-642-38445-5_44).
  2. S. Perween, M Fahad, MA Khan, “Trends and future perspectives in additive manufacturing”, First International Conference on Advanced Materials & Process Engineering (AMPE-2016), pages 49-59.
  3. S. Perween, M Fahad, MA Khan, “Process Development strategies in 3D printing”, Conference on Emerging Trends in Automotive Engineering (CETAE-17).
  4. S. Perween, M Fahad, MA Khan, “Systematic experimental evaluation of function based cellular lattice structure manufactured by 3d printing”, Applied Sciences. 2021 Nov 8;11(21):10489. https://doi.org/10.3390/app112110489

Dr. Shakeel Ahmed

  1. A. Shakeel, D. T. Asquith, “Strain measurement of a thin hyperelastic polymer sheet using 3D-Digital Image Correlation and Bulge Test”
  2. J. Corden, G. Carlson, I. Hardman, K. Heaton, A. Alderson, D. Asquith, A.  Shakeel (2019). Lumen Constriction Band. Wo2017149322.

Ms. Javeria Younus

  1. J. Younus, M. Fahad, and M. A. Khan, “Evaluation and benchmarking of maintenance organization and planning/scheduling at automotive industries in Pakistan,” presented at the 13th Global Conference on Sustainable Manufacturing, 2015.
  2. J. Younus, M. Fahad, and M. A. Khan, “Evaluation of maintenance management practices in automotive industries of Pakistan,” presented at the 5th international mechanical engineering congress, 2015.
  3. Yaqoob, S., Younus, J., Iruj, M., 2021. Lean Manufacturing Practices with Context to Senior Management: A Study of Manufacturing Companies of Pakistan. PJOSR 1, 10–13. https://doi.org/10.57041/pjosr.v1i1.3
  4. M.K. Azam, S. Yaqoob “Closed loop supply chain-practical implementation in a university environment”, International conference on innovation and immerging trends in business management, education and social sciences 2018.

Ms. Saima Yaqoob

  1. A.Fatima , A. Ahmed, S. Yaqoob, M.  Fahad, “Wear comparison of unstructured and structured tungsten carbide“. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 234(10), 1658–1668, 2020. https://doi.org/10.1177/1350650120923533
  2. M. Wasif, S.A. Iqbal, A. Fatima, S. Yaqoob, M. Tufail, “Experimental Investigation for the Effects of Wire EDM Process Parameters over the Tapered Cross-Sectional Workpieces of Titanium Alloys (Ti6Al-4V)”, Mechanical Sciences, vol. 11, issue 1, page 221-232, 2020.
  3. S. Yaqoob, M.K. Azam, “Research activities in industry 4.0 function as enablers for agile manufacturing implementation”, 2nd Asia International Multidisciplinary Conference, Malaysia 12-13 May 2018
  4. M.K. Azam, S. Yaqoob “Closed loop supply chain-practical implementation in a university environment”, International conference on innovation and immerging trends in business management, education and social sciences 2018.